超级玩家
![Rank: 5](static/image/common/star_level3.gif) ![Rank: 5](static/image/common/star_level1.gif)
- 贡献度
- 59
- 金元
- 6577
- 积分
- 894
- 精华
- 0
- 注册时间
- 2008-11-18
|
本帖最后由 fbi_fd 于 2015-11-20 01:19 编辑
原帖
https://www.reddit.com/r/fo4/comments/3tbj0f/how_to_fix_fast_travel_not_working_bug_and/
1.During normal gameplay (not VATS, terminal, convo, etc), open up the console and type "DumpInputEnableLayers" without the quotes of course.
2.In the data dump (shouldn't be large,mine was only 2 lines) look for Disabled Layers and for the Fast Travel Disabled line. It should have an integer number after it. Mine was 0.
3.Type "ResetInputEnableLayer #" without the quotes and where # = to the layer that mentioned Fast Travel Disabled.
我简单介绍一下
1.在正常游戏状态下(没有打开VATS、终端、哔哔小子等),按~键打开控制台,输入dumpinputenablelayers
2.此时会列出几行英文,注意找里面带有Fast Travel关键字那一段(下图蓝框),前面应该有Layer #这个标记(#是代表一个整数,可以是0、1、2、3.....),例如我就是0
3.输入ResetInputEnableLayer #,#就是上面得到的那个整数,比如按照我的情况就输入ResetInputEnableLayer 0,若输入正确会显示successfully reset
4.按~退出控制台,此时可以试试快速旅行了,我这样操作完之后就修复了~
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?注册
x
|